22 May 2010 - San Antonio
I’ve had a number of people ask me where they should host their Git repositories. Of course, my default question back is, “Can the code be public or does it need to be private?”. Usually they say, “public”. Therefore, my repsonse is Github.com. If they say, “private” I still say Github. If they don’t ‘trust’ Github, which they should - click the link, then my response is Gitosis and Gitweb. This is by no means the only solution. I’m aware of other ones like Gitorious. I’ve never used Gitorious.
Back to Gitosis. My personal Gitosis server is a slice at Slicehost.com. You can use an Ubuntu server at home as long as you have remote access. I’ve personally only used Gitosis with an Ubuntu slice, so I don’t know if there are any quirks with other Linux distributions. After setting up a slice (after following the instructions here and here) I am ready to go.
“Enough talk. Let’s fight” ~Po, Kung Fu Panda
After logging into your box, let’s install Git (if not already installed):
$ sudo apt-get install git-core ... After this operation, 16.3MB of additional disk space will be used. Do you want to continue [Y/n]?
Press enter or type ‘Y’ and press enter and git will be installed. Type the following to confirm:
~ > git --version
and you’ll see something like:
~ > git --version git version 22.214.171.124
Also install the python-setuptools because we’ll need them (gitosis is written in python):
$ apt-get install python-setuptools ... After this operation, 1126kB of additional disk space will be used. Do you want to continue [Y/n]?
Press enter or type ‘Y’ and press enter and python-setuptools will be installed.
We need to clone the gitosis source locally to install it:
$ mkdir src && cd src ~/src $ git clone git://eagain.net/gitosis.git Initialized empty Git repository in /root/src/gitosis/.git/ remote: Counting objects: 614, done. remote: Compressing objects: 100% (183/183), done. remote: Total 614 (delta 434), reused 594 (delta 422) Receiving objects: 100% (614/614), 93.82 KiB, done. Resolving deltas: 100% (434/434), done.
Now let’s install it:
~/src $ cd gitostis ~/src/gitostis $ python setup.py install
Gitosis is now installed. Next steps are to create git user and handle a file permission on a git hook.
Create Git User
sudo adduser \ --system \ --shell /bin/bash \ --gecos 'git version control' \ --group \ --disabled-password \ --home /home/git \ git
You’ll see something like the following if it is successful
Adding system user `git' (UID 103) ... Adding new group `git' (GID 105) ... Adding new user `git' (UID 103) with group `git' ... Creating home directory `/home/git' ...
Use local, public ssh key
You need to initially use your public ssh key (id_rsa.pub). If you have one, it will be at $HOME/.ssh/id_rsa.pub and if you have never generated one, you can do so by running the following command (accept the default location and you don’t need to enter a passphrase when prompted):
ssh-keygen -t rsa
Now you need to upload it to the server/slice. I usually use the scp (secure copy command):
scp $HOME/.ssh/id_rsa.pub firstname.lastname@example.org:/tmp/
This will upload the local id_rsa.pub file to the /tmp/ folder on the server. Why there? So that the git user can use it. How is that possible? The folder has permissions of 777 (drwxrwxrwt) meaning everyone has read and write access to it.
Sidenote: SSH Port
If you have your sshd daemon running on a different port other than 22 (which is the default, but I highly suggest changing), then you need to use scp like this:
scp -P 12345 $HOME/.ssh/id_rsa.pub email@example.com:/tmp/
I believe the “-P” option must be capitalized.
Initialize gitosis-admin repository
On the server, issue the following command to set your public ssh key as the first authorized key of a new gitosis-admin repository:
sudo -H -u git gitosis-init < /tmp/id_rsa.pub
You will see something like the following:
~$ sudo -H -u git gitosis-init < /tmp/id_rsa.pub Initialized empty Git repository in /home/git/repositories/gitosis-admin.git/ Reinitialized existing Git repository in /home/git/repositories/gitosis-admin.git/
This means it was successful.
Take note: If you put your id_rsa.pub file in a different location you need to use that instead of /tmp/id_rsa.pub
Change Permissions on post-update hook
You have to set the permissions on the post-update git hook of the gitosis-admin repository so that gitosis-admin can add new repository structures when they are added/removed to/from the gitosis.conf file.
sudo chmod 755 /home/git/repositories/gitosis-admin.git/hooks/post-update
Note: First round of this post, I didn’t make this change. When I added a new project, it failed because this hook didn’t have the right permissions.
Clone gitosis-admin repository
Now we’re going to use Git to administrate this gitosis instance. I think that is pretty ingenius. Let’s clone the gitosis-admin repository locally:
~ > git clone git@YOUR_SERVER_HOSTNAME:gitosis-admin.git Initialized empty Git repository in /Users/user/gitosis-admin/.git/ remote: Counting objects: 5, done. remote: Compressing objects: 100% (4/4), done. Receiving objects: 100% (5/5), done. Resolving deltas: 100% (1/1), done. remote: Total 5 (delta 1), reused 5 (delta 1) ~ > cd gitosis-admin
We are now in the gitosis-admin repository folder locally
Two most common errors
~ > git clone git@YOUR_SERVER_HOSTNAME:gitosis-admin.git Initialized empty Git repository in /Users/user/gitosis-admin/.git/ ssh: connect to host YOUR_SERVER_HOSTNAME port 22: Connection refused fatal: The remote end hung up unexpectedly
it is because you have used a port for SSH other than port 22 (the default). To fix this, you need to edit your .ssh/config file and add the following:
Host YOUR_SERVER_HOSTNAME Port YOUR_PORT
Of course, you need to put in your server hostname and port number (i.e., mydomain.com and 12345)
~ > git clone git@YOUR_SERVER_HOSTNAME:gitosis-admin.git Initialized empty Git repository in /Users/user/gitosis-admin/.git/ Permission denied (publickey). fatal: The remote end hung up unexpectedly
This has usually hit me because I locked down my /etc/ssh/sshd_config file to only allow in certain users or groups. I have to change the AllowUsers line in my file from:
AllowUsers jmeridth git
Once I restart the ssh daemon:
~ > sudo /etc/init.d/ssh restart
Now the git user has access to reach my server/slice via ssh.
The local gitosis-admin repository
You now have a local clone of the gitosis-admin repository. The contents are only a conf file and key directory:
~/gitosis-admin(master) > ls total 8 -rw-r--r-- 1 user staff 114B May 22 21:31 gitosis.conf drwxr-xr-x 3 user staff 102B May 22 21:31 keydir
Note: before anyone asks, the (master) notation in my prompt is usage of the __git_ps1
Next Part: Add Projects and Contributors